top of page

Power Tool Battery Storage: How to Store Cordless Tool Batteries Safely

Nov 10
4 min read

Most cordless drills, drivers, saws and grinders now run on lithium-ion packs. A busy contractor might own 20 or 30 of them. A rental yard or a facilities team might own hundreds.


Search "power tool battery storage" and you'll mostly find wall racks and organizers. Those keep packs tidy. They don't do much for heat, damage or fire. This guide covers both sides: keeping batteries healthy, and keeping a bad battery from becoming a building fire.


LithiPlus small single door lithium-ion battery storage cabinet

The basics: temperature, charge and condition


Keep them in the right temperature range


Heat is the enemy of lithium-ion batteries, and garages and truck boxes get hot.


  • DeWalt recommends storing its batteries between 32°F and 104°F, and avoiding places where temperatures can reach or go above 104°F (40°C).

  • For charging, the U.S. Fire Administration says not to charge lithium-ion batteries below 32°F or above 105°F.


In practice that means:


  • Don't leave packs in a closed truck or van in summer.

  • Don't store them in direct sun, next to a water heater or near a space heater.

  • In a hot garage, move them somewhere climate-controlled during the worst months.

  • Let a pack that's been out in freezing weather warm up before you charge it.


Always check the manual for your brand. Ranges vary by manufacturer and battery model.


Store them partly charged


For longer storage, a partial charge is usually better than full or empty. STIHL, for example, recommends storing its lithium-ion batteries at 40% to 60% charge. Check what your tool brand recommends.


Check them for damage


The NFPA recommends routinely inspecting lithium-ion batteries for cracking, bulging or leaking. On a jobsite, packs get dropped off ladders, run over and left in the rain. Pull a pack out of service if you see:


  • Cracks or a split case

  • Swelling or bulging

  • Leaking

  • Burn marks or melted plastic

  • A pack that gets very hot in use or on the charger


The U.S. Fire Administration adds odd smells, color changes and strange noises to that list. If a pack is swollen, follow our steps on what to do with a swollen lithium battery.


Charging habits that prevent fires


  • Use the brand's own charger. Off-brand chargers may fit and still be wrong for the pack.

  • Don't leave packs on the charger for days. Unplug when they're done.

  • Charge on a non-flammable surface. Not on a pile of rags, sawdust or cardboard.

  • Don't charge overnight in an empty building unless the packs are in an enclosure built for it.

  • Unplug a pack that's noticeably hot while charging, as NFPA advises.


Power tool battery storage at home


For a homeowner with a handful of packs:


  • A metal shelf or a metal cabinet in a cool part of the house beats a wooden shelf in a hot garage.

  • Keep packs away from fuel cans, solvents, paint and other flammable products.

  • Keep them away from the door between the garage and the house. You don't want a fire there.

  • Put loose packs where the terminals won't touch keys, screws or other metal.


Power tool battery storage on jobsites and in shops


This is where the risk adds up. One shop or job trailer can hold dozens of packs, all charging at the end of the day, often with no one around overnight.


A few rules that make a big difference:


  • Make one place the charging station, not a charger on every bench.

  • Separate damaged packs right away. Don't toss them in the bottom of a gang box.

  • Keep the charging area clear of sawdust, rags, fuel and packaging.

  • Know your exits. Don't put the charging station by the only door.


When a fire-rated cabinet makes sense


If you're charging many packs at once, or charging after hours, a lithium-ion storage and charging cabinet contains a failing pack and alerts you.


LithiPlus cabinets are FM & EN certified, tested to EN 14470-1 and EN 1363-1, and rated for 90 minutes of fire resistance. Each comes with a control box that has a visual and audible alarm, a smoke detector and an automatic fire extinguisher. Shelves are perforated and rated for 250 lbs. Charging inside the cabinet is supported with an optional electrical outlet system that has a fire-resistant cable passage.


Sizes for tool batteries:



For damaged packs, a thermal runaway container gives you a dedicated place to isolate them until disposal.


To compare cabinets with smaller options, see LiPo bag vs. fireproof box vs. battery cabinet. For workplace requirements, see lithium battery storage requirements.


Getting rid of old tool batteries


Don't throw them in the trash or a curbside recycling bin. The EPA warns that batteries in municipal bins can be crushed and start fires. Take them to a battery recycler, a retailer take-back program or your local household hazardous waste site. The EPA points to Earth911 and Call2Recycle to find a drop-off. Put tape over the terminals first.


Frequently asked questions


Can I store power tool batteries in the garage?


Yes, if the garage stays within your manufacturer's storage range. DeWalt recommends 32°F to 104°F. If your garage gets hotter than that, move the packs during the hot months.


Should I store power tool batteries charged or empty?


Partly charged. STIHL recommends 40% to 60% for storage. Check your brand's manual.


Is it OK to leave tool batteries on the charger?


Unplug them once they're full. Don't leave packs charging unattended for long periods.


Can I keep tool batteries in a toolbox?


Yes, but keep terminals covered or separated from loose metal, and don't leave the box in a hot vehicle.


What do I do with a swollen tool battery?


Stop using it, don't charge it, and isolate it on a non-flammable surface. Then take it to a battery recycler or hazardous waste site.


Sources



Comments


bottom of page